How to Flash Samsung Clone J7(6) with SP7731 6.1 Firmware
If you have a Samsung Clone J7(6) smartphone and you want to upgrade or downgrade its software, you can use the SP7731 6.1 firmware file to flash it. Flashing is the process of installing a new operating system on your device, which can fix various issues such as bugs, lagging, or bootloop. However, flashing can also erase your data and void your warranty, so you should do it at your own risk and backup your important files before proceeding.
In this article, we will show you how to flash Samsung Clone J7(6) with SP7731 6.1 firmware using a tool called SPD Upgrade Tool. This tool is compatible with Windows PC and supports Spreadtrum devices like Samsung Clone J7(6). You will also need a USB cable and a computer to perform the flashing.
Steps to Flash Samsung Clone J7(6) with SP7731 6.1 Firmware
Download the SP7731 6.1 firmware file for Samsung Clone J7(6) from here and extract it on your computer.
Download and install the SPD Upgrade Tool on your computer from here.
Launch the SPD Upgrade Tool and click on the Load Packet button. Browse and select the .pac file from the extracted firmware folder.
Click on the Start Downloading button to begin the flashing process.
Turn off your Samsung Clone J7(6) and connect it to your computer via USB cable while holding the Volume Down button.
The tool will detect your device and start flashing the firmware. Wait for the process to complete and do not disconnect or interrupt it.
Once the flashing is done, you will see a green Passed message on the tool. You can then disconnect your device and reboot it.
Congratulations! You have successfully flashed Samsung Clone J7(6) with SP7731 6.1 firmware. You can now enjoy the new features and performance of your device.